Styropor® product portfolio
For conventional EPS insulating applications, BASF’s range includes the Styropor® F 15 R product types. Peripor® rounds out BASF’s offering for the construction segment. With its short cycle times during processing and its low water absorption, the product fulfills the most demanding requirements.
In addition, BASF serves the packaging industry with its EPS product range: The products of the Styropor® P 26 series are characterised by their mechanical strength.
| Product | Flame retardant | Block | Molding | Loose filling | Insulation performance | Bead size rage (mm) | Usual bulk density rage (kg/m3) | Typical applications | Technical Information |
| Styropor® F 15 R Pentane content: ~5,3% | |||||||||
| Styropor® F 215 R
|
 |
|
|
+ |
1,0 - 2,0 | ≤12* - 25 | Exterior insulation (ETICS), roof, wall and floor insulation |  |
|
| Styropor® F 215 R-L | |
|
|
+ |
1,0 - 2,0 | ≤11* - max. 15 | Only for low density applications (e.g. impact sound insulation, low density spacers in construction elements, loose beads) | |
|
| Styropor® F 315 R |
|
|
|
+ |
0,7 - 1,0 | 16 - 30 | Roof, wall and floor insulation, insulating concrete forms (ICF) | |
|
| Styropor® F 315 R-L | |
|
|
+ |
0,7 - 1,0 | 15-25 | Roof, wall and floor insulation | |
|
| Styropor® F 415 R |
|
|
0,4 - 0,7 | 20 - 30 | Decorative ceiling panels, technical mouldings | |
|||
| Peripor® R Pentane content: ~5,3% | |||||||||
| Peripor® 200 R | |
|
|
O | 1,0 - 2,0 | 22 - 30 | Perimeter insulation, flat roof insulation, sanitary components | |
|
| Peripor® 300 R | |
|
O | 0,7 - 1,0 | 25 - 30 | Perimeter insulation, flat roof insulation, sanitary components | |
||
| Styropor® P 26 Pentane content: ~6,0% | |||||||||
| Styropor® P 226 C |
|
|
O | 0,9 - 1,3 | 10* - 30 | Insulation without flame-retardend requirement, packaging, blocks for contour cutting | |
||
| Styropor® P 326 |
|
O | 0,7 - 0,9 | 16 - 30 | Packaging, insulated containers (e.g. fish boxes) | |
|||
| Styropor® P 326 C |
|
O | 0,7 - 0,9 | 18 - 50 | For cycletime-optimized production of mouldings | |
|||
| Styropor® P 426 |
|
O | 0,4 - 0,7 | 18 - 30 | For thin-walled mouldings | |
|||
| Styropor® P 426 C |
|
O | 0,4 - 0,7 | 20 - 50 | For cycletime-optimized production of thin-walled mouldings | |
|||
| Styropor® P 656 | |
O | 0,2 - 0,4 | 12 - 25 | Aggregate for lightweight plaster and bitumen sealing compounds | |
|||
* by double pass expansion
also available as BMB-certified product
TOP